close

Lectro2000-P Electric pedestal mounted patio heater, 2000W

LECTRO is an infra-red outdoor electric patio heater, ideal for instant warmth in the garden. Mounted on an adjustable pedestal, with automatic tilt switch off, it has a heating power of 2000W. The heating element is Quartz. Adjustable thermostat control. Automatic overheat protection. Safety tilt switch-off mechanism.

£ 79.99
Availability: Out of Stock




Features:
  • Infra-red electric patio heater- for outdoor use
  • Instant warmth in the garden
  • Mounted on adjustable pedestal
  • Heating power 2000W
  • Heating element is Quarz
  • Adjustable thermostat control
  • Automatic overheat protection
  • Safety tilt switch off mechanism

Code: LECTRO2000-P
Bar Code: 5031599045399
Product Size: 50cm length. 50cm width. 210cm height.
Packaging Information: Mail order inner with colour label outer
Packing Size: 56.5cm length. 22cm width. 56.5cm height.
Country of origin: China


Before installing your appliance,you must disconnect the electrical supply at the circuit breaker.
1>Taking off four pieces of M6*30¡£
2>Insert the lower post assembly (11)in to the base assembly (16) and then fix it tightly by means of 4-M6X30 screw,and insert the clamp(12) into the lower post (11).
3>Join the lower Post Assembly (11)and the Middle Post£¨9£©together with 3-M5X6 screw
4>Join the Upper Post Assembly (7) and the Middle post(9) together with 3-M5X6.screw .
5>Join the Heating Element Assembly (1) and the Upper Post Assembly(7) together,then fix them tightly by rotating the Knob,and put the power cord supply into the clamp.
6>According to the request of use angle,Heating Element Assembly can adjust Angle at 0¡ã~45¡ã¡£
RELATED PRODUCTS